Monty Widenius (one of the original authors of MySQL) has asked for help in lodging objections to Oracle's purchase of Sun Microsystems.
I have no objections to the EC posting my mail, but I thought to also post it here, and help spread the word.
( Mail to the EC merger registry )
I've been prodding at the concept of the new network script in OpenRC-0.5, and I'm at a loss to try and see why Roy has decided to toss the old network config system away. The new system doesn't have a lot of capabilities, and most significantly totally loses the ability to restart a single interface without affecting the rest of the system. If it's just for a rewrite, then I'm not too worried, but unless all the functionality is still there, I'm worried we are going to move backwards with it.
At the same time, I don't think many people are aware of how powerful the "old" network configuration mechanism is. The net.examples file is only the start, once you start mixing in the pre/post calls, there's a lot of power. It's capable of some feats that I don't see used even in certain parts of the Gentoo documentation[1]. I've put together some of my gems of conf.d/net, and if you have some, I'd love to hear them. Leave a comment or email me the scripts, along with a description.
I've also started a bit of storage in my Gentoo webspace for these collected works of network configuration, with a bit more documentation.
solar was asking about release statistics, so I grabbed the current data
from Bouncer. The nearly 34k releases for 10.0 is just in the 5 days that it's
been out. I included the various architetures that were part of each released
'product', to make some degree of comparision possible.
| What | Hits | Arches |
|---|---|---|
| 2005.1 | ||
| installcd-minimum | 228561 | alpha,amd64,hppa,ia64,ppc,ppc64,sparc64,x86 |
| installcd-universal | 374388 | alpha,amd64,hppa,ppc,sparc64,x86 |
| packagecd | 162537 | alpha,amd64,ppc,ppc64,sparc64,x86 |
| 2006.0 | ||
| livecd | 242422 | x86 |
| minimal | 287496 | alpha,amd64,hppa,ia64,ppc,ppc64,sparc64,x86 |
| packagecd | 42572 | amd64,ppc-g4,ppc-ppc,sparc64 |
| packagecd-32ul | 10909 | ppc64 |
| packagecd-64ul | 2981 | ppc64 |
| universal | 111359 | alpha,amd64,hppa,ppc,ppc64,sparc64 |
| 2006.1 | ||
| livecd | 307481 | amd64,x86 |
| minimal | 330505 | alpha,amd64,hppa,ia64,ppc,ppc64,sparc64,x86 |
| packagecd | 39118 | ppc,ppc-g3,ppc-g4,ppc64,ppc64-g5 |
| universal | 122280 | alpha,hppa,ppc,ppc64,sparc64 |
| 2007.0 | ||
| bt-http-seed | 72980 | ALL |
| livecd | 411958 | amd64,x86 |
| minimal | 496943 | alpha,amd64,hppa,ia64,ppc,ppc64,sparc64,x86 |
| packagecd | 27593 | ppc-g4,sparc64 |
| universal | 137554 | hppa,ppc,ppc64,sparc64 |
| 2008.0_beta1 | ||
| livecd | 19426 | amd64,ppc64,x86 |
| livedvd | 4 | amd64,x86 |
| minimal | 14069 | alpha,amd64,hppa,ia64,ppc64,sparc64,x86 |
| universal | 1745 | ppc64,sparc64 |
| 2008.0_beta2 | ||
| livecd | 37771 | amd64,x86 |
| livedvd | 17842 | amd64,x86 |
| minimal | 55745 | alpha,amd64,hppa,ia64,ppc,sparc64,x86 |
| universal | 3142 | ppc,sparc64 |
| 2008.0 | ||
| livecd | 477934 | amd64,x86 |
| minimal | 406531 | alpha,amd64,hppa,ia64,ppc,sparc64,x86 |
| packagecd | 12308 | sparc64 |
| universal | 83600 | hppa,ppc,sparc64 |
| 10.0_pre20090926-1952 | ||
| livedvd | 4870 | amd64,x86 |
| 10.0 | ||
| livedvd | 33703 | amd64,x86 |
| 10.1 | ||
| livedvd | 0 | amd64,x86 |
To add a new USE flag, that's globally enabled for all Linux profiles, what's the minimum set of profiles that need to change? Deprecated profiles must be handled as well, for users that need to migrate still.
I ran into this today, while working on the USE=modules changes for linux-mod.eclass.
As an attempt to solve this, I munged up some GraphViz work to show profile inheritance, pictures as the end. Both sets have the trailing profiles "/desktop", "/developer", "/server" turned off for the 2008.0 and 10.0 releases, to cut down on the noise.
Graphs and script for download.
( Which profiles? )If all nodes in a given subgroup/cluster have an edge going to a single destination node, is there any way to get graphviz to replace them with a single fat edge from cluster to destination node?
So for our Vancouver heatwave (I noted 39C away from the water today, in the shade!), it's finally claimed some of my computer hardware. Most annoying, the battery backup unit (BBU) in the newer fileserver, and 1.5 of the disks of the RAID1 array in the old server...
My website and personal email will be offline for a day or two while I ensure my backups are up to date, and redeploy to the newer fileserver (after I buy a new BBU tomorrow).
I wasn't aware of this forthcoming movie until some of my co-workers mentioned it today, and watching the trailers, it wasn't the movie itself that caught me (but it looks promising too), but rather the usage of South African settings and historical footage from the apartheid era. As a South Africa, some of it is just too eerily familiar. It's just really apartheid again, with a twist that it's against "real aliens" now, not the forced alienation of the black population.
I really need to get back to writing in this blog. In the meantime, I scoured my email for the last 2 years of fortune submissions that I hadn't compiled together yet, and make a release. Go forth and amuse yourselves with it.
Now for the second set of statistics. These aren't directly useful to mirrors in estimating their traffic, but instead gives a good overview of how our mirroring setup works internally, and now much traffic is involved in the fan-out stage. Distfiles are the main content moved around by this system, but it is also used for the other directories for releases, experimental and snapshots.
A very quick overview of the existing setup:
Each of the distfiles mirrors has about 140-160MB of upstream traffic every day (including both the new files and the rsync overhead for scanning). If there are no files changed, the rsync traffic for a directory scan is 1-2MB. While this isn't a lot of traffic, it's very spiky, as mirrors tend to be on fast links.
The new weekly builds from the Release Engineering team will probably be adding another 1.3GB per week, staggered as one arch per day.
I got a small subset of the logs from the OSU FTP cluster for processing some of these statistics. They cover the 24 hour period of 2008/08/07 UTC. It does not have data of which traffic went via Internet2, and I've grouped the sources by country code (using IP::Country::Fast from CPAN).
( Numbers )As a bit of analysis, I think that more than half of our mirrors (Europe, Middle East, RU) would benefit from having a box to sync against in Europe.
I was doing some statistics about Gentoo mirrors to see about future plans, and thought that the indirect crowd that read my blog via the various aggregators might be interested in numbers.
These are the traffic for boobie.gentoo.org, which is a newer box in the official rsync.gentoo.org box directly maintained by the Infrastructure team. Hardware specs are 2x Xeon 3050 @2.13Ghz, 4GB RAM. Disk is mostly irrelevant - the rsync workload is served purely from RAM (tail-packing reiserfs, backed via loop device pointing to a file on tmpfs).
Inbound traffic is spiky, but does not exceed 10Mbit by more than a little bit - we can the inbound rsyncs from the rsync1 master to 10Mbit. Outbound traffic varies between 4Mbit and 9Mbit, with an average around 6-7Mbit.
( Numbers )![[livejournal.com profile]](https://www.dreamwidth.org/img/external/lj-userinfo.gif){kind=small}
logik for this work of brilliance. Posted with permission, and slightly reformatted here.A stoner, takes a puff of his joint and says, "Hi, I'm a mac!".
The poorly dressed wannabe bank teller beside him says, "... and I'm a PC."The door nearby blows in and a heavily armed tactical team storms the room,
throwing both of them to the floor, barrels of MP5k's against their skulls.Someone yells, "AREA CLEAR!"
The lieutenant comes in after them, smoking a cigar, surveying the area.
"I'm Solaris,
the sergeant over there is BSD (You remember your daddy mac?),
the pretty boy with the M14, he's Linux,
and the guy toting the M60... That there is HPUX.
Now, shut the fuck up, both of you.
We've had about enough of your 'Bill and Ted Get a Computer' bullshit.
Keep it up, and we're gonna do the same thing to you that we did to OS2, got it?"
As a recent random time-waster, I went and read all of the bugs in the "Recruitment" product of the Gentoo Bugzilla. In doing so, I found twelve developers (ebuild or other) that weren't listed in our LDAP or historical tracking at all. I added them back now, I have gentoo-core announcements from when several of them joined as well that I double-checked.
There are 92 developers without join dates. We need to find join dates for them via BugZilla and CVS/SVN. Also audit all join dates for every other developer. Lastly, discover and capture retirement dates for every past developer.
Present statistics: 673 developers total. 247 active, 426 retired.
Following up on my earlier posting on the AD2000BX/AD1989B SPDIF support being broken, I figured out the required fixes, and they are waiting in the sound-2.6 kernel tree for the next merge window
Migrating data and cleaning up my old desktop display head machine, I decided to check out my ccache statistics. This is a very old cache, having first started 2006-01-13. The oldest item in the present cache is 2008-01-12, but the statistics are valid for the entire period. hits 229k and 834k misses = approximately 21% hit rate. This wasn't any crazy repeated compiling of my own code, just a dedicated ccache directory for Portage to use.
( Raw numbers )
Setting up the storage on my new machine, I just ran into something really interesting, what seems to be deliberate usable and useful, but completely undocumented functionality in the MD RAID layer.
It's possible to create RAID devices with the initial array having 'missing' slots, and then add the devices for those missing slots later. RAID1 lets you have one or more, RAID5 only one, RAID6 one or two, RAID10 up to half of the total. That functionality is documented in both the Documentation/md.txt of the kernel, as well as the manpage for mdadm.
What isn't documented is when you later add devices, how to get them to take up the 'missing' slots, rather than remain as spares. Nothing in md(7), mdadm(8), or Documentation/md.txt. Nothing I tried with mdadm could do it either, leaving only the sysfs interface for the RAID device.
Documentation/md.txt does describe the sysfs interface in detail, but seems to have some omissions and outdated material - the code has moved on, but the documentation hasn't caught up yet.
So, below the jump, I present my small HOWTO on creating a RAID10 with missing devices and how to later add them properly.
( MD with missing devices HOWTO )Code fixed now, no specs available yet See my patches here.
Edit 2008/09/05:A private source that I inquired of indicates that the AD2000B part was only a special run of the AD1989B part. There shouldn't be any functional differences. On the side of a spec sheet, the AD1989B specs should be available "shortly" from Analog Devices.
Original posting:
So in more details to follow, I picked up hardware for a new workstation to replace my G5. The only part of the hardware that isn't working yet, is the digital audio (SPDIF/Toslink) output. My motherboard is an Asus P5Q-Premium, and the specifications claim to have "ADI® AD2000B 8-Channel High Definition Audio CODEC" as the audio chip. This chip is apparently the successor to the AD1988B chip. The analog audio part works fine, just that I use optical to overcome an interference issue on the run between my computers and my actual working area of my desk (with a small digital decoder and stereo speakers).
Digging around in the ALSA drivers, it just seems I need to find a different set of controls to toggle the digital lines to be outputs or enabled - and that this data would be in the public datasheet, just like previous versions of the chip. I submitted a technical request to Asus a few days ago, with no response yet. I also contacted Analog Devices directly. Their customer support referred me to their application engineers, whom I phoned, and they then proceeded to deny the existence of the chip, and I quote: "It's not in my system, we don't manufacture it." That's really interesting, because I've got it on my motherboard!
Either the divisions of Analog Devices aren't talking, or Asus is using chips from a 3rd party that's ripping off Analog Device's trademark amongst other things.
Here's the text off the chip:
AD2000BX 14??793.1 #0816 0.3 SINGAPORE
I tried to take a photo, but it's really annoying and hard to read, without dis-assembling my machine, which I'd prefer not to do at this point.
However, I did find another photo on the web, of the same area from a review of the motherboard. The Analog Devices logo is also clearly visible after the 'BX' portion of the text. From the photo I could make out:
AD2000BX 1383055.1 #0808 0.2 SINGAPORE
If I had to make a guess about it, the chip is AD2000BX, the second line is the serial number, the third is the year and week of manufacturer, plus the revision of the chip, and the last line is the manufacture location.
If you're from Asus or Analog Devices, and you're reading this, where's the datasheet for the chip? Is it a real ADI part? I simply want the public datasheet like the rest of models so that I can fix digital audio output in Linux myself, and contribute it back to the ALSA project.
P.S. The upstream ALSA bug is here. There's no downstream Gentoo bug.
Dear Lazyweb,
To avoid a repeat of my previous snafu with a Dell PowerConnect 2716 - in which I found that the VLAN functionality didn't work properly with broadcast packets (esp DHCP requests) to my cable modem.
Specifically, I'd love to replace my need for having a separate switch for my external segment vs. my internal segment, with a single switch and two/three VLANs. I tried to do it with the Dell switch, but found disastrously that it just didn't pass the broadcast packets at all :-(. On the plus side, the Dell switch did get me the jumbo frames that I wanted.
So, does anybody have a Linksys SRW2016 or SRW2024 and can report on how well they work with DHCP packets over VLAN-segregated networks?
This is a copy+paste from my email to the gentoo-dev mailing list, simply because some developers and users follow the RSS feeds rather than read email. If you want the bot in your channel and you are a channel founder/lead op, please respond on the thread in the mailing list
![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
Hi folks,
Sorry that it's taken this long to get completed, but the Jeeves
replacement, Willikins, is finally 99% done, and ready to join lots of
channels.
Getting the bot out there
-------------------------
If you would like to have the new bot in your #gentoo-* channel, would
each channel founder/leader please respond to this thread, stating the
channel name, and that they are the contact for any problems/troubles.
Bug reports
-----------
Please open a bug in the Gentoo Infrastructure product, using the
'Other' component, and assign it directly to me.
Custom bot functionality:
-------------------------
Here's all the functionality that we have assembled, beyond the standard
rbot stuff.
Bugzilla
========
!bug [ZILLA] ID
Looks up bug #ID in the per-channel default or specified bugzilla.
!bugstats [ZILLA]
Totals of bugs per the bugzilla 'status' field.
!archstats [ZILLA] [STATUS] [RESO]
Totals of bugs per architecture, optionally with some specific set of
status or resolution values, comma delimited.
status = OPEN, DONE, UNCONFIRMED,NEW,ASSIGNED,REOPENED, RESOLVED, VERIFIED, CLOSED
Reso = FIXED, INVALID, WONTFIX, LATER, REMIND, DUPLICATE, WORKSFORME,
CANTFIX, NEEDINFO, TEST-REQUEST, UPSTREAM
zilla = gentoo xine sourcemage redhat mozilla kernel fdo abisource
apache kde gnome
If you want another bugzilla, file a bug.
Gentoo-specific
===============
!meta [-v] [CAT/]PACKAGE
Print the metadata and optionally herd members for a given package.
!changelog [CAT/]PACKAGE
Changelog stats for a package
!devaway list
List all away developers.
!devaway DEVNAME
Display .away message for a single developer.
!herd HERD
Show herd members
!expn NAME
Show the expansion of any public Gentoo mail alias
!glsa GLSAID
Shows the title and external IDS for any given GLSA ID.
!earch [CAT/]PACKAGE
Earch output for a given package
!rdep [CAT/]PACKAGE
Reverse RDEPEND for a given package
!ddep
Reverse DEPEND for a given package
What isn't supported yet
------------------------
1. !glsa -s TEXT
This used to search for GLSAs that matched that string in their title or
external IDS.
2. New bug announcements
Jeeves used to announce brand new bugs to #gentoo-bugs as well as
targeted channels or users, depending on the product, component,
assignee, cc and a number of other factors (deeply nested if/else
trees). The old implementation had this in code entirely, and it would
be nice to avoid having to modify the code whatsoever, and instead have
some domain-specific language for doing this.
Source availability
-------------------
Gentoo specific:
http://git.overlays.gentoo.org/gitweb/?p=proj/rbot-gentoo.git
Bugzilla support:
http://git.overlays.gentoo.org/gitweb/?p=proj/rbot-bugzilla.git
(flameeyes has his own tree as well, but he's been sick lately, so it
was lagging behind my development)
Right now, if you want to run your own instance of the bot, you will
need the latest Git tree of the rBot itself, as upstream only fixed the
last remaining issue a couple of hours ago.
Thanks to
---------
solar:
Running the old Jeeves Eggdrop till now, and helping to document all of
the Eggdrop functionality we used.
flameeyes:
Bugzilla plugin development
halcy0n:
Gentoo-specific stuff
tango_, jsn-:
(rbot upstream developers) For fixing the bugs as I found them :-).
Cardoe was complaining that repeatedly hitting the Gentoo CVS server was too slow, and it turned out he wasn't using SSH ControlMaster at all. Other developers have blogged about it before, but here is a quick reminder how.
Without ControlMaster, running "time ssh robbat2@cvs.gentoo.org w" shows a turnaround of 1.9 seconds. With ControlMaster, It's more in the range of 0.07-0.09 seconds :-).
~/.ssh/config:
Host master-cvs.gentoo.org
HostName cvs.gentoo.org
User robbat2
ControlMaster yes
ControlPath ~/.ssh/master-%l-%h-%p-%r.sock
Host cvs.gentoo.org
ControlMaster no
ControlPath ~/.ssh/master-%l-%h-%p-%r.sock
BatchMode yes
Setup Usage:Now just do anything like you would normally. For security, you should probably close the ControlMaster session if you're going away from your machine for a long time. It would be nice to detect the loss of the ControlMaster and re-initiate it always at the start of a sequence.
